Feed on
Posts
Comments

Except noted otherwise, content on this site is published under the Creative Commons Attribution-ShareAlike 3.0 license.

Download

Versions

v1.1

  • Changes from v1.0
    • Moved both flash LEDs to the same side so they point to the same direction.
    • Added an on-board resistor (R1) for the flash LEDs.
    • Added a separate flash LED switch.
    • Moved the power switch to the bottom side.
  • Schematic (in .sch)
  • PCB design (in .brd)

Parts List



Schematic

v1.0 (Nov 2011)

Parts List



Schematic

3 Responses to “AASaver Download”

  1. WK says:
    February 27, 2012 at 11:31 pm

    The parts list says R1 is 3.3K, but the schematic shows it as 68 ohms. Which is correct?

    Reply
  2. cliff dittmar says:
    April 4, 2013 at 1:16 pm

    thank you plenty of used aa batterys to use

    thanks cliff

    Reply

Leave a Reply